CT-1002G

CT-1002G

10+2 Port Industrial Managed PoE+ Booster Gigabit L3 Switch

10x Gigabit Ethernet ports with 8x IEEE 802.3at PoE+

2x 1000F(x) SFP Slot

Built for harsh environments and wide temperature range application

RSTP, MSTP, ERPS, LACP for Network Redundancy

QoS CoS/DSCP to increase determinism

Supports IGMP Snooping v1/v2/v3, up to 512 groups

DHCP Relay Option 82 for policies IP address assignment

SNMP v1/v2c/v3 for network management

Supports Storm Protection

USB storage for configuration-free replacement

Supports industrial automation protocols Ethernet/IP and Modbus TCP

Supports PoE PD Alive Check Function for PoE Device Power Recycle

Power Boost for PoE+

Technology
Standard	IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseX IEEE 802.3x Flow Control IEEE 802.3az Energy-Efficient Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at PoE+ IEEE 802.3ad/802.1AX LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid STP IEEE 802.1s Multiple STP ITU-T G.8032 / Y.1344 ERPS IEEE 802.1Q VLAN Tagging IEEE 802.1ad Stacked VLANs IEEE 802.1p Class of Service IEEE 802.1X Network Authentication IEEE 802.1AB LLDP IEEE 1588 PTP
Processing Type	Store and Forward

Technology

Standard

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseX
IEEE 802.3x Flow Control
IEEE 802.3az Energy-Efficient Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3ad/802.1AX LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid STP
IEEE 802.1s Multiple STP
ITU-T G.8032 / Y.1344 ERPS
IEEE 802.1Q VLAN Tagging
IEEE 802.1ad Stacked VLANs
IEEE 802.1p Class of Service
IEEE 802.1X Network Authentication
IEEE 802.1AB LLDP
IEEE 1588 PTP

Processing Type

Store and Forward

Switch properties
Switch Fabric	24Gbps
Priority Queues	8 Queues
Jumbo Frame	9216bytes
MAC Table Size	16K
Packet Buffer	12Mbits
VLAN Table Size	4094
IGMP Group	512
ACL Group	512
VLAN IP Entries	64
Routing Entries (IPv4/IPv6)	512/256 host, 64/64 LPM

Switch properties

Switch Fabric

24Gbps

Priority Queues

8 Queues

Jumbo Frame

9216bytes

MAC Table Size

16K

Packet Buffer

12Mbits

VLAN Table Size

4094

IGMP Group

512

ACL Group

512

VLAN IP Entries

Routing Entries (IPv4/IPv6)

512/256 host, 64/64 LPM

Software Feature
Network Redundancy	RSTP, MSTP, G.8032 ERPSv2, Port Trunking with LACP
Security	802.1X, RADIUS, TACACS+, SSL, SSH
Management	IPv4, IPv6, Web, Telnet, Serial Console, CLI, SNMP v1/v2c/v3, uPnP
Diagnostics	RMON, SNMP Inform/Trap, Syslog, SMTP, Port Mirroring, LLDP
Configuration	DHCP Server/Client, Relay Option 82, TFTP, USB
Filter	802.1Q VLAN, Q-in-Q, IGMP Snooping v1/v2/v3, IGMP Querier, Independent Vlan Learning
Time Sync.	NTP, IEEE1588v2 OC (Software Timestamp), BC (Software Timestamp), TC (Hardware Timestamp)
QoS	CoS, DSCP, WRR/SPQ Queuing, Storm Protection
PoE	Powering Status, PoE Monitoring, Scheduling, PD Alive Check
Industrial Profiles	Ethernet/IP, Modbus TCP, Profinet
L3 Switching	Static Routing, RIP v1/v2, OSPF v2, VRRP v2

Software Feature

Network Redundancy

RSTP, MSTP, G.8032 ERPSv2, Port Trunking with LACP

Security

802.1X, RADIUS, TACACS+, SSL, SSH

Management

IPv4, IPv6, Web, Telnet, Serial Console, CLI, SNMP v1/v2c/v3, uPnP

Diagnostics

RMON, SNMP Inform/Trap, Syslog, SMTP, Port Mirroring, LLDP

Configuration

DHCP Server/Client, Relay Option 82, TFTP, USB

Filter

802.1Q VLAN, Q-in-Q, IGMP Snooping v1/v2/v3, IGMP Querier, Independent Vlan Learning

Time Sync.

NTP, IEEE1588v2 OC (Software Timestamp), BC (Software Timestamp), TC (Hardware Timestamp)

QoS

CoS, DSCP, WRR/SPQ Queuing, Storm Protection

PoE

Powering Status, PoE Monitoring, Scheduling, PD Alive Check

Industrial Profiles

Ethernet/IP, Modbus TCP, Profinet

L3 Switching

Static Routing, RIP v1/v2, OSPF v2, VRRP v2

Interface
RJ45 Port	10x 10/100/1000T(x) with 8x PoE+, auto negotiation speed duplex mode, auto MDI/MDI-X
Fiber Port	2x 1000F(x) SFP Slot
PoE Pin Out	V+, V+, V-, V-, for pin 1, 2, 3, 6, Endspan, MDI Mode A
LED Indicators	Per unit: PWR1, PWR2, Fault, Ring Master, Ring State Ports: Link/Active with highest speed(Green), low speed(Amber) PoE: Output Power
Alarm Contact	1x relay output with current carrying capacity of 1A @ 24 VDC
Digital Inputs	1x isolated input from the electronics. +13 to +30V for state "1" -30 to +3V for state "0" Max. input current: 8mA
Button	Multiple functions reset button
Serial Console	1x RS232 in RJ45 connector with console cable, 115.2Kbps, 8N1
Storage	1x USB 2.0 storage for firmware update, configuration backup, restore, boot up and syslog

Interface

RJ45 Port

10x 10/100/1000T(x) with 8x PoE+, auto negotiation speed duplex mode, auto MDI/MDI-X

Fiber Port

2x 1000F(x) SFP Slot

PoE Pin Out

V+, V+, V-, V-, for pin 1, 2, 3, 6, Endspan, MDI Mode A

LED Indicators

Per unit: PWR1, PWR2, Fault, Ring Master, Ring State
Ports: Link/Active with highest speed(Green), low speed(Amber)
PoE: Output Power

Alarm Contact

1x relay output with current carrying capacity of 1A @ 24 VDC

Digital Inputs

1x isolated input from the electronics.
+13 to +30V for state "1"
-30 to +3V for state "0"
Max. input current: 8mA

Button

Multiple functions reset button

Serial Console

1x RS232 in RJ45 connector with console cable, 115.2Kbps, 8N1

Storage

1x USB 2.0 storage for firmware update, configuration backup, restore, boot up and syslog

Power Requirements
Operation Voltage	12-57VDC, redundant dual inputs, >50VDC for PoE+ output recommended
Connection	1x removable 4-contact terminal block
Power Consumption	0.32A@48VDC without PDs' consumption
PoE Power Budget	Max. 240 W for total PD consumption, Max. 30 W per PoE port
Protection	Overload Current Protected, Reverse Polarity Protected

Power Requirements

Operation Voltage

12-57VDC, redundant dual inputs, >50VDC for PoE+ output recommended

Connection

1x removable 4-contact terminal block

Power Consumption

0.32A@48VDC without PDs' consumption

PoE Power Budget

Max. 240 W for total PD consumption, Max. 30 W per PoE port

Protection

Overload Current Protected, Reverse Polarity Protected

Mechanical Construction
Enclosure	Aluminum
Protection Class	IP30
Dimensions	72x145x118 mm (WxHxD)
Weight	0.88 kg
Mounting	DIN-Rail Mounting, Optional Wall Mounting Kits

Mechanical Construction

Enclosure

Aluminum

Protection Class

IP30

Dimensions

72x145x118 mm (WxHxD)

Weight

0.88 kg

Mounting

DIN-Rail Mounting, Optional Wall Mounting Kits

Environmental Limits
Operating Temperature	Extended: -40°C ~ 75°C (-40°F ~ 167°F)
Storage Temperature	-40°C ~ 85°C (-40°F ~ 185°F)
Ambient Relative Humidity	5 to 95%, (Non-Condensing)

Environmental Limits

Operating Temperature

Extended: -40°C ~ 75°C (-40°F ~ 167°F)

Storage Temperature

-40°C ~ 85°C (-40°F ~ 185°F)

Ambient Relative Humidity

5 to 95%, (Non-Condensing)

Regulatory Approvals
EMI	CE EN 55032 Class A
EMS	IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field)
Free Fall	IEC60068-2-32
Shock	IEC60068-2-27
Vibration	IEC60068-2-6
Green	RoHS Compliant
Certifications	IEC 61000-6-2 IEC 61000-6-4 EN 50121-4
MTBF	>100,000 hours
Warranty	5 Years

Regulatory Approvals

EMI

CE EN 55032 Class A

EMS

IEC61000-4-2 (ESD)
IEC61000-4-3 (RS)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Surge)
IEC61000-4-6 (CS)
IEC61000-4-8 (Magnetic Field)

Free Fall

IEC60068-2-32

Shock

IEC60068-2-27

Vibration

IEC60068-2-6

Green

RoHS Compliant

Certifications

IEC 61000-6-2
IEC 61000-6-4
EN 50121-4

MTBF

>100,000 hours

Warranty

5 Years

Available Models
CT-1002G-T	10+2 Port Industrial Managed PoE+ Booster Gigabit L3 Switch - 10x 10/100/1000T(x) with 8x 30W PSE + 2x 1000F(x) SFP Slot - Operating Temperature: -40°C ~ 75°C (-40°F ~ 167°F)

Available Models

CT-1002G-T

10+2 Port Industrial Managed PoE+ Booster Gigabit L3 Switch
- 10x 10/100/1000T(x) with 8x 30W PSE + 2x 1000F(x) SFP Slot
- Operating Temperature: -40°C ~ 75°C (-40°F ~ 167°F)

10+2 Port Industrial Managed PoE+ Booster Gigabit L3 Switch

In a continuing effort of improvement and updated technology, product specifications are subject to change without notice.

Unit = mm